How to Diagnose & Fix Lost Well Water Pressure

For anyone interested in getting off grid or becoming more environmentally friendly the idea of having your own well sounds like a dream. However, the reality is that well water needs to be tested regularly to ensure it is safe to drink. In addition you’ll need to purchase a pump and secure it in place. Purchasing a pump is easy; simply visit truflopumps.com.au to find some of the best pumps and advice on the market.

But, just as there are many benefits to using well water instead of being attached to the mains; there are also disadvantages that you need to be aware of and prepared for.

Pump Failure

This is the biggest concern especially if you live remotely. Once the pump fails you may not be able to manually access the water; you’ll need emergency supplies to ensure this is not an issue. Fortunately, as well as keeping some emergency supplies you can make sure you maintain your pump and keep an eye out for signs that it is likely to fail. One of the biggest issues and potential sign of pump trouble is a reduction in water pressure.

Diagnosing Lost Well Water Pressure

It’s easy to know that your water pressure is low; the flow of water from your taps will be reduced. However, there are several reasons why this may be the case; you don’t need to instantly assume that the pump needs to be replaced.

Electrical Supply

The first step is to check your electrical supply. If there is any issue with this the pump may not be getting the power it needs to do its job. One of the most common issues in this case is actually a fuse! It is normal for well pumps to have a double fuse set up. The power surge or even a nasty storm can cause one set of fuses to blow; reducing the power to the pump. It will deliver water to your tap but the pressure will be reduced.

Low Water Level

For a pump to deliver water at high pressure it needs to be submerged in water. If you’re experiencing low or no water then you need to check the water level in your well. It’s a good idea to switch the pump off and check this as soon as you note the issue. A pump that isn’t getting enough flow can overheat and burn out. If your water level is low there may be little you can do about this; you’ll have to get in experts to assess the well and whether it needs to be dug deeper.

Pipes

All pipe work corrodes over time. It is also possible to get debris in the pipes which can cause blockages and disrupt the water pressure. You’ll need to visually inspect your pipes or even change the outlet on your pump to see if the pressure coming from the pump is different to that at your faucet.

The Pump

There are a number of mechanical issues that can go wrong with the pump and result in low water pressure. If you think you’re suffering from any of these then you need to call an expert; it doesn’t mean the pump needs to be replaced. In many cases it can be repaired.

• Water pressure switch
• Relay switch
• Priming issues
• Motor failure