Essentials to Take Care of Your Garden Pool

Your wish to see your garden pool glittering clean is not too hard to come by. All pools have their respective maintenance needs and so has yours. The basic common need of all the pools is the regular intensive care to keep them hygienic. There are a lot of pool cleaning companies with their respective chemicals and techniques like Maple Pools sell pool cleaners and so on.

No matter if you get the services of some good company in this regard, you still have to be vigilant about this. Certain things need your special attention for their in-time completion. You must also be able to do a few chores on your own. The followings are a few essentials to keep in mind while taking care of your pool.

Cleanliness of the pool filters

Keeping the filters clean ensures the hygiene of your pool. With the regular use over a few days, there gets a large amount of debris accumulated at the filters. The increase in the flow between the pressure gauge and the flow meter is a definite sign telling the time for cleanliness. If the difference touches 10 to 15 pounds per square inch, the filters need to be cleaned at the earliest then.

Cartridge, sand and diatomaceous earth are the three kinds of filters with their specific maintenance procedures. But, they all require regular periodic cleaning depending upon how frequently they are being used.

Finding and Repairing of Leaks

Determining the reason of the water level getting lower after a few days is not that easy at times. Either evaporation or some leakage is the possible cause. You may determine the cause by what is called a simple bucket test.

Place a plastic bucket three quarters filled with water in the pool and mark the water lines both inside and outside the bucket. After three days, if the level on both the sides has fallen equally, this is because of evaporation. If the level outside the bucket has fallen more, it means there is some leakage inside the pool. Here, you must call some professional and get the damage repaired the soonest.

Getting the Water Super-chlorinated

The accumulation of organic contaminants like ammonia and nitrogen over a few days reacts with the chlorine of the pool water to make chloramines. These, in turn, give off the strong chlorine smell specific with the water pools.

The addition of a large amount of chlorine to the pool water will react with the chloramines and remove the bad odour readily. This is very much dire to super-chlorinate or shock the pool water back to the normal chlorine level. In order to get the best results, you must consult the manufacturers’ guide before taking your attempt.

Maintaining the PH level

There must never be too much acidity or alkalinity in pool water to keep it hygienic for the users. The PH scale is a measurement of these factors running from 0 to 14. The ideal reading ranges between 7.2 and 7.8, quite safe for the swimmers and the sanitizers to show their topmost efficiency. A number of testing kits are available in the market to enable you to measure the PH level of your pool water. Out of these kits, the two are most homeowners friendly, namely, reagent kits and test-strips.

Regarding reagent kits, you take a sample of pool water and add liquids or tablets to it. The change in the water colour indicates its chemical balance. For test strips, the game is different. You dip them in the pool water which changes their colour due to the dyes present in them. You then match this strip colour to the colour chart and determine the PH of your pool water. Through this information, you can decide what kind and how much amount of the chemical your pool needs for its treatment. The above said essentials along with many others may help you a lot take care of your pool. Along with this always make sure to put all your kits and tools in tool backpack, so that things can be organised and found in time.