There are signs that something is wrong: your sink takes more time to drain, and water pools around the floor of the bathroom when you shower. Also, your bathroom and kitchen smell strange and unpleasant. It’s really not a better time to get a sink that won’t drain. It’s inconvenient, looks bad, and isn’t clean.
Depending on how bad the clog is, you may have to call a plumber. However, if the clog is not severe, the cleaning process of blocked drains will be easy, and also you can do it on your own.
Cleaning Blocked Drains- What Is The Process?
There are many ways to clear a clogged drain, but it’s not always easy to tell which one will work best for your home’s plumbing. As a general rule, if you don’t want to damage your pipes, it’s best to start with the least harsh solutions before having to move on to stronger ones. Following are a few useful tips for the cleaning process of blocked drains. Let’s check it out.
Take off the strainer.
The very first step is to take the strainer off by unscrewing the piece that is holding it in place. Once it’s off, give it a thorough cleaning. Hair often gets tangled all around the strainer. As a result, there is a clog in drains. Clean the opening of the drain and consider replacing the strainer.
Run hot water through it to make sure that it is clean. Look under the sink if you require to unbolt a pivot rod to disable a strainer or stopper. Cover the pliers in a cloth, so you don’t ruin the finish. Further, to get the stopper off, turn the ring at the bottom of the sink.
Plunge Onward
If the cleaning process of Blocked Drains didn’t work, use the plunger you have on hand. First, use rags to block the overflow of holes and drains of any nearby sinks. If there isn’t already a small pool, pour a few inches of water into the clogged sink. Put some petroleum jelly on the edge of a plunger to make it easier to hold. The plunger should be put over the drain.
Set the Trap
If plunging doesn’t clear a clogged drain, it’s time to take out the trap and clean it:
- Put a bucket under the sink to hold any water that may leak.
- Check the trap for a plug, which is usually a square or hexagon at the bottom of the bend. To unclog the drain, pull out the plug and pass a long and straight coat hanger up the pipes.
- Put the plug back in.
If you can’t find a plug, you can take the trap apart by easing the two connections that hold it in place. If the couplings are chrome, wrap a cloth around the pliers. Rinse the trap and pass a sewer snake, coat hanger, or long, thin, clean of the pipelines. Remove the trap and pour hot soapy water down the drain.
Contact a professional plumber
If the aforementioned solutions do not work, it is time to contact a professional plumber. Pipes are occasionally choked by years of accumulated oil accumulation or even tree roots farther down the line. These are issues that only an expert should address.
Conclusion
Clogged drains are annoying, especially if you have to handle them often. Before using harsh chemicals, you should always try to get rid of any physical blockages first. However, choose the cleaning process of blocked drains depending on how bad the clog is.