No one wants to spot a problem with their pool, but unfortunately, it happens from time to time. If you do find a problem, it’s important to take care of it right away so that it doesn’t turn into a bigger issue. Many pool problems can be easily fixed with a little elbow grease and some basic knowledge. Also, be sure to check your pool’s warranty to see if the issue is covered. Here are some common pool problems and what to do if you spot them:
Green Water
Green pool water is usually caused by algae. Algae can be introduced to the pool in several ways, including rainwater, swimmers tracking it in, or even from your garden hose. To get rid of algae, you’ll need to shock your pool and run the filter for 24 hours. You may also need to add an algaecide to your pool. Also, be sure to brush the sides and bottom of your pool to loosen any algae that may be attached. This problem is fairly easy to fix and isn’t usually covered by warranties.
Pool Pump Problems
If you’re having problems with your pool pump, it’s important to troubleshoot the issue as soon as possible. There are a number of things that can cause a pool pump to stop working, including a clogged impeller, a faulty motor, or even a power outage. A pool equipment repair company can help you diagnose and fix the problem.
Low or High pH Levels
If your pool’s pH levels are too low, it can cause skin and eye irritation. It can also damage your pool equipment. To raise the pH levels, you’ll need to add a base such as sodium carbonate. If your pH levels are too high, it can also cause skin and eye irritation. It can also make your chlorine less effective. To lower the pH levels, you’ll need to add an acid such as muriatic acid. This problem is usually easy to fix and isn’t usually covered by warranties. Many pool test kits come with instructions on how to adjust the pH levels.
Leaking Vinyl Liner
According to The Pool Factory, “A liner can leak for several reasons. The most common reason is because of a hole or tears in the liner. This can be caused by rocks, toys, or other objects that are sharp and come into contact with the liner.” If you have a vinyl liner pool and you spot a leak, you’ll need to drain the pool and have the liner repaired or replaced. Several companies specialize in liner repair and replacement, so be sure to do your research to find the best one for the job.
Fiberglass Pool Cracks
Fiberglass pools are known for being durable, but they can still crack. Cracks can be caused by ground movement, objects hitting the pool, or even freezing temperatures. If you spot a crack in your fiberglass pool, it’s important to have it repaired as soon as possible. By doing so, you can prevent the crack from getting worse and causing more damage to your pool.
Worn O-ring or Gasket
If you have a pool with a cartridge filter, it’s important to check the O-ring and gasket regularly. These parts can wear out over time and cause your pool to leak. If you spot a leak, you’ll need to replace the O-ring or gasket as soon as possible. This is usually an easy fix and many pool supply stores carry these parts. Also, be sure to check your pool’s warranty to see if the issue is covered. If it is, you may be able to get the part for free or at a reduced cost.
Dirty Filter
If your pool’s filter is dirty, it can cause a number of problems. A dirty filter can reduce the efficiency of your filtration system, which can lead to cloudy water. It can also put strain on your pump and cause it to wear out prematurely. To clean your filter, you’ll need to remove it from the pump and rinse it off with a hose. You may also need to use a filter brush to remove any stubborn dirt and debris. Be sure to check your filter’s manufacturer’s instructions before cleaning it.
These are just a few of the most common pool problems. If you spot any of these issues, be sure to take care of them as soon as possible. By doing so, you can prevent further damage to your pool and keep it looking its best.